DIM Laser Welding Wires
______

for application within/on:

Tool and Mold making

Apparatus construction

Marine, Aviation and Space technology

Medical and Dental technology

Brief outline of laser welding wire service

Our detailed laser welding wire catalogue and respective data sheets are available on request.
The price list is attached to the catalogue.

Technical data, such as hardeness, elongation and tensile strength values correspond with the values received from the welding material manufacturers.

Diameter of laser welding wires: 0,1 mm / 0,15 / 0,2 / 0,25 / 0,3 to 0,7 until 1,0 mm.

We deliver our laser welding wires on different bobbins as well as on rods. Length and quantity based on your request.

 

Article	Characteristics	Fields of application
DIM L-Dimalloy high-alloyed	Universal, steel grade comprehensive applicable, cold tough and heat proofed, very compatible with nitrided steels, acid-resistant, strong edges. Thermally impossible to harden, not chrome platable, not etchable, delayed erodible, highly polishable. Post-curing through blow, pressure and warmth outsourcing on 40 HRC.	Q & T-steel, hot- and cold-working steel Case hardening steel, Plastic moulds and chrome steels. Excellent on closing edges.
DIM L-3K56 EN ISO G46 2 C G4Si1	completely austenitic laser welding wire DB-licensing	Higher strength steels, fine grain structural steels to S460N, structural steel, un- and low-alloy steels
DIM L-6 NIM Special alloy (NiMoCr)	Quenching and tempering, hardenable, nitritable, polishable, etchable, chrome platable, CVD-coatable.	NIMAX IMPAX HOLDAX
DIM L-8	Hardness of the pure weld material on hardening steels: Approx. 27 - 38 HRC. Tensile strength after drawing, depending on wire diameter: > 900 - 1200 N / mm². Hardenable to approx. 60 HRC Operating temperature: 600-650°C Increased tensile strength and purity Quenching and tempering, hardenable, nitridable, polishable, etchable, chrome platable	1.1730/C 45 / IMPAX, HOLDAX, 13 CrMo 4 to 42 CrMo 4, 20CrMo12 / AISI / SAE / ASTM : 4140 / 1.2311/12, 1.2162, 1.2738, 1.2764/67, 1.7218, 1.7225, 1.7227, 1.7335/37/50/54/57/59/73/76/81, 1.7380 (steel and cast), 1.8075, TOOLOX 33 or P20.
DIM L-9 Special alloy	Hardness of the pure weld material on hardening steels: Approx. 27 - 38 HRC. Tensile strength after drawing, depending on wire diameter: > 900 - 1200 N / mm². Hardenable to approx. 60 HRC Operating temperature: 600-650°C Increased tensile strength and purity	13CrMo4 - 42CrMo4 1.2311 / 1.2312 1.2738 1.1730 / C 45 1.6565 / 1.7218/19/25/27 1.7335/80 1.8519 / 1.8550 TOOLOX 33 IMPAX P20 / P 20+S / P20+Ni / 4140 / 4340 / EN24 / 5140 / 8620 GP240GH (1.0619) SCM420/430/435/440 … SCr440 NAK55 / NAK80
DIM L-10 1.5424	Must be applied, if it will be etched/grained. Well applicable on nitrided materials. Quenching and tempering, hardenable, nitritable, polishable, etchable, chrome platable.	1.2311/12 1.2162 1.5415 Container construction P235GH / P265GH / P295GH. Q & T steels before hardening. 5140 / 8620
DIM L-11 3-GZ-40-T	Elastic, tough, high-quality, steel grade comprehensive applicable, quenching and tempering, hardenable, nitritable, polishable, chrome platable, conditionally etchable. 32-42 HRC	1.2714 1.2738 1.2343, 1.2344 QRO 90 Supreme SKT4 NAK55 / NAK80
DIM L-13 3-GZ-45-T	Elastic, tough, high-quality, steel grade comprehensive applicable, quenching and tempering, hardenable, nitritable, polishable, chrome platable, conditionally etchable. 42-46 HRC	1.2343, 1.2344 Toolox 44 Alu casting dies ES Primus SL Dominal HTR / TQ1 1.7225 SKD6/7/61/ NAK80 / NAK55 H13 / H11 / H10 / S7 / H21 / H19
DIM L-13 blank	see DIM L-13, but non-copper-plated (blank)	see DIM L-13
DIM L-17 1.7734	homogeneous welding filler and has a high level of purity, therefore no microporosity Operating temperatures up to 500°C 42 HRC	15CrMoV6 25CrMo4/25CrMoS4 20CrMo12 34CrMo4/35CrMo4 1.7734, 1.7213 1.7218/19/20/21, 1.7226/29/31 AISI: 4137H, 4137, 4135H, 4135, 4130 Air 9117 15CDV6 / LN9425 Aviation alloys, motorsport alloys, tool steels General tool steels with a hardness of approximately 42HRC
DIM L-18 1.2567	Heat proofed, temper resistant, same colour. Quenching and tempering, hardenable, nitritable, polishable, chrome platable, conditionally etchable. 42-46 HRC (pure welding material), oil-hardened 50-52 HRC, tempered 48 HRC	Hot-working steels 1.2343, 1.2344, 1.2367, 1.2606 1.2764, 1.2767 High-gloss polishings
DIM L-19 1.4937 CrMoWV12Si	Good corrosion resistance, very good polishability, very clean erodibility, good ductility and toughness. Especially suitable for repairs against glass fiber abrasion. Temperable, high temperature resistant, increased creep elongation and creep rupture strength at temperatures up to approx. 600°C. Maximum achievable hardness: 54HRC	1.2083 / 1.2085 1.2316 / 1.2343 / 1.2344 1.2365 / 1.2367 1.2606 1.2767 Tyrax
DIM L-20 3-GZ-55-ST	Not suscectible to cracking with multilayered welding, hot wear resistance, high-quality, steel grade comprehensive applicable. Quenching and tempering, hardenable, nitritable, polishable, chrome platable, conditionally etchable. 53-58 HRC	1.2767 - 1.2343, 1.2344 - 1.2764 W100 – 321, W 360, W 403 1.2085 / 1.2365/67 / 1.2606 ELMAX DIEVAR HOTVAR GRANE SVERKER RIGOR VANADIS UNIMAX Alu die-castings SKT6 A2 / D2 / H11 / D3 / O1 / L6 / D6 / H10 / H12 / S7 / H21 / M2 4340 / EN24 / 6F7
DIM L-20 blank	see DIM L-20, but non-copper plated (blank)	see DIM L-20
DIM L-21 CoCr Super alloy CoCr	similar to „Stellit 21“ resistant to high temperatures abrasion- and tear-resistant high and changing temperature resistant high toughness- and strength high elasticity high chemical corrosion resistance good sliding properties non-magnetic highly polished Tensile strength Rm N/mm²: > 1400 yield strength N/mm²: bis 1115 Elongation: > 28 % thermal conductivity W/mK: 12,6 analysis: Co > 60 % up to 45 HRC (solidified)	Hot runner nozzles, wear parts at extreme demand, Armor with extreme wear in mold making application on: gas turbine, engines, acid fittings, chemical filter, spring joints. castings out CoCr / CoNiCr / CrNiWCo
DIM L-210 Co Super alloy / high-performance material CoCrNiMo	high resistance to wear high toughness high tensile strenght high ductility high elasticity high material fatigue resistance high chem. corrosion resistance reverse bending resistance abrasion resistant good sliding properties non-magnetic highly polished cold hardening Tensile strength Rm N/mm²: up to 1110 yield strength N/mm²: up to 734 Elongation: 43 % thermal conductivity W/mK: 12,5 Hardness of pure laser welding wire: approx. 36 HRC up to 45 HRC (solidified)	In molds and mechanical engineering: Hot runner nozzles (high stability times), partially against extreme wear, gg. chem./electrochem. corrosion. Large range of applications including: press- / acid- and steam valve, valve seats, shut-off and throttling valves, chemical filter, seals, oil industry, aerospace, engine components, flexure, torsion spring, investment casting parts CoCr, forge alloy CoCr, alloy out CoNiCrMo and CrNiWCo – L605, Gas pressure measuring device and much more.
DIM L-22 NiCoMoTi	Temperature shock resistant, very tough und wear-resistant, metal slidable on metal, Quenching and temperging, hardenable, nitritable, polishable. Artificially aged > 58 HRC	Hot-working steels Cold-working steels Alu casting-dies Drawing- and embossing-tools, folding-press dies Machine slipways Camshafts 1.2709 / 1.2706 / 1.2885 1.6354 / 1.6358 TYRODUR Böhler W 720 / V 725 MARLOK All Alloy 29/18 (Kovar etc.) A579 / H19
DIM L-23 Special alloy	Quick heat dissipation, Carbide deposits Up to 45 HRC	STM-Steels e.g.: HTCS 130/150 Alu casting-dies Hot stamping dies Hot deburring tools, forging dies Hot shearing knives, warmpress piercer
DIM L-24 martensitic Cr-Si-W-Steel	Cutting stability, tough, impact resistant, temper resistant in continious operation up to 700°C 57-59 HRC	Appropriate for upper knives on Hot deburring tools or hot shearing knives, in combination with DIM L-23 lower knives.
DIM L-30 6-GZ-60-S	Cutting stability, tough, impact resistant, High resistance to wear in case of glas and carbon fibre reinforced plastic syringes. Hardenable, polishable, chrome platable. 54-60 HRC	cutting-wearing edge Cold-heat working tools machine spindle 1.1730/C45 (hardened) 1.2379 / 1.2363 1.2080 / 1.2162 1.2764 1.2842 / 1.2510 1.7131 K 190 / K 340 ELMAX SVERKER SKD1/12/62 SKS3 A2 / D2 / D3 / O1 / D6 / M2
DIM L-31 1.2606 / S Z Fe3	impact resistant, wear- abrasion resistant strong edges heat resistant quenching and tempering, hardenable, nitritable, polishable, not etchable 54-60 HRC	Cold-heat working tools, plastic- casting-dies, Hot shearing knives, 1.2767 / 1.2343, 1.2344 / 1.2080 / 1.2379 / 1.2436 SKD1 / SKD2 / K100 / K107 un-alloyed and low-alloyed steels D6 (D3) / O1 / A2 (304) H12
DIM L-35 Cr-Steel	Stainless, resistant to corrosion, bright finishable, same colour, sea water resistant, martensitic welding material. Up to 48 HRC on Cr-steels, 52-55 HRC on C-steels, 1. layer	Corrosion resistant Plastic-mould steels M 310 / 303 Extra M 314 Extra / N 320 / 420SS M 333 / M 390 ELMAX ES Anticor SL 1.2316 C-cutting steels 1.2379 1.2080 / 82 / 83 / 85 1.2436 1.2842 1.4021 / 1.4034 / 1.4057 / 1.4112 Heat resistant armoring (900°C), on machine components (G)X35CrMo17 SUS420J2 D6 / S136 (H) / 422 / 422+S
DIM L-36 Cr-Steel (Mo-Ni)	Stainless, resistant to corrosion, wear-, cavitation- and erosion resistant 43 HRC 47 HRC strain hardened	Plastic-mould steels M 300 / M 303 / M 310, 1.2082 Steel casting Seawater-power plants Sealing surfaces on armatures Depositories Rotors, compressors CORRAX, 1.4313, 1.4008 SUS420 422 / 422+S
DIM L-37 Special material CrTiMn-Steel	Stainless, resistant to corrosion, same colour compared to 13-18% Cr-steels	Crack free on reparations/corrections High-gloss polished Cr-Plastic forms 13-18% chrome steels 1.2083 (~Böhler M310), 1.2316 (M330/303) M314/M315 and similar Cr-steel- and Cr-cast steel Crack free fusion/joint welding on Cr-steels
DIM L-38 High speed cutting steel	Especially wear resistant, crack free on single layer. 60-64 HRC	Injection moulding tool, all alloys, machine spindle 1.2379 1.2080 K 340-390 / M 390 / S 390 ELMAX SVERKER SKD11 / SKH51 D2 / M2
DIM L-40/06 2.4806 Ni-Ba alloy	See DIM L-40/31 Not hardenable not structurable or etchable Elongation As: >40% Tensile strength Rm N/mm²: 680	All tool steels Buffer layers, cracks of all sorts Sealing of cooling channels, high-strength connections, stainless and chemical resistant steels, chemical apparatus construction. CrNi – cast steel 1.4859 / 1.4876
DIM L-40/31 2.4831 / Inconel 625 chemically stable Ni-Base Alloy	High elongation, tensile strength, yield strength. Absolutely crack free, stainless, resistant to extreme heat, resistant to low temperatures, not hardenable, not structurable or etchable, martensitic welding material Elongation As: >35% Tensile strength Rm N/mm²: 740	Various tool steels Stainless and chemical resistant steels, 1.4529 / 1.4539 Sealing of cracks (e.g. water/oil cooling) Buffer layers Refrigeration technology Chemical apparatus construction 2.4856 / 2.4858 Turbine construction Aviation technology Medical technology Marine technology High-strength joint welding
DIM L-Nickel NiTi	Pure nickel quality with 3% Ti resistant to many corrosive media from acid to alkaline good Temperature characteristics	Nickel molds- and tools, pure nickel- other nickel alloys in: chemical- food industry, energy industry, apparatus construction
DIM L-41 Fe-Ni alloy	Stainless, elastic, crack free, different raw materials, heat resistant, Elongation: up to 30% > 200 HB	Grey cast irons (GG) Spheroidal graphite iron (GGG) Ductile centrifugal casting Cast iron with vermiluar graphite (GJV) Oldtimer parts such as: gutted manifolds cracks on steels and high alloyed engine block cracks Mixed joints steel-copper-nickel among themselves and with cast steel
DIM L-42 GH Special alloy	Wear resistant, hard. 55-58 HRC	Transform drawing tools out of GGG-cast materials, on drawing radii
DIM L-50 Standard (V4A) 1.4571 / 1.4576	stainless	Cr-Ni-steels (V4A) (stainless steels) joint welding 1.4122 1.4401/04/35/36/ 1.4571/80/83 1.4409 (G-X2 CrNiMo 19-112) AlSi 361L / 316Ti / 316Cb
DIM L-52 Standard (V2A) 1.4301 / 1.4316	stainless	Cr-Ni-steels( V2A) (stainless steels) joint welding. 1.4301/06/11/12/ 1.4541/46/50 AlSi304 / 304L / 302 / 321 / 347
DIM L-53 1.4310	stainless	Spring steels
Stainless and Ni-Ba alloys for apparatus engineering Special alloys	1.3912 (Invar 36) expansion alloy 1.3954 - not magnetizable, non-magnetic, e.g. for 1.3948/51/53,1.4439 1.3981 (Kovar) expansion alloy 1.4009 1.4104 1.4115 e.g. for 1.4006, 1.4021/34/57, 1.4112, (G)X35CrMo17, SUS420J2 1.4122 e.g. for martensitic steel, e.g. for medical tools, cutting 1.4301 e.g. for 1.4303/06/08/10/11/12/19/ 1.4541/46/50/52 1.4310 e.g. for spring steels 1.4316 e.g. for 1.4301/03/06/08/10/11/12/19/ 1.4541/46/50/52 1.4337 e.g. on heat-resistant, ferritic-austenitic Cr-Ni steels 1.4351 e.g. for 1.4008, 1.4034, 1.4313, 1.4317, 1.4351, 1.4407, 1.4414 1.4370 e.g. for martensitic welding material also 1.4057 1.4404 e.g. for med. tools, chem. apparatus construction: 1.4401/03/09/35/36, 1.4571/8083 1.4410 Superduplex 1.4430 e.g. for 1.4401/04 / 1.4441 also 1.4057 1.4440 Welding in chemical apparatus and container construction on similar types CrNiMo(N) steels/cast steel types, e.g. 1.4429/ 1.4435/ 1.4436/ 1.4438/ 1.4439/ 317L 1.4459 - covers as welding filler a variety of stainless base materials 1.4462 – Duplex 1.4501 Superduplex 1.4502 e.g. for 1.4000/02/16/57/59,1.4510/11/12/23 1.4519 e.g. for 1.4539/37, 1.44/2939//1.4505/06, 1.4529/31/36, 1.4585 1.4539 - e.g. med. tools, chem. apparatus construction, marine technology 1.4542 - 17-4 PH e.g. for 1.4542 / 1.4548 / 17.4 PH, ASTM: A564 / A705 / A693 1.4551 e.g. for 1.4312/1.4541/43/46/50/51/52/1.4878/1.6902/05/07 1.4571 e.g. for 1.4401 / 1.4404/08 / 1.4435/36 / 1.4409, 1.4420 / 1.4573 / 1.4580/81/83 1.4576 e.g. for 1.4401 / 1.4404/08 / 1.4435/36 / 1.4409, 1.4420 / 1.4571/73 / 1.4580/81/83 1.4755-22H for high-temperature fuel cells 1.4842 - 1200°C scaling resistance, e.g. for 1.4821-45/48/78/85 17-4 Ph / AMS 5825 e.g. for 1.4542 / 1.4548 / 17.4 PH, ASTM: A564 / A705 / A693 1.4937 - quenching and tempering, high temperature resistance, increased elongation and creep strength, corrosion resistance at temperatures up to approx. 600°C. Z.B.: 1.4913-1.4937, 1.8070, 1.7335, 1.7380 2.4560 NiFe z. B. mixed compound of all steel-Cu-Ni types, gray cast iron 2.4607 Highly corrosive acids, e.g. for 2.4602/05/10, 2.4819 Hastelloy C-22 / Alloy 22 2.4711 cobalt alloy, high corrosion resistant against chem. attacks 2.4806 e.g. for nickel base alloy, 2.4816/17, 2.4630/31/69, 2.4851/67/69/70, 2.4951 2.4819 / 2.4889 (C276) for highly corrosive media 2.4831 nickel base alloy corresponds to Iconel 625 CoCrMo alloys for dental technology DIM L-Alloy 21 CoCrMo highest corrosion resistance in chem. Media, biomedicine DIM L-Alloy C276 Laser welding filler for Alloy C276 and other corrosion-resistant alloys, e.g.: 2.4819 / 2.4610 / 1.4583 DIM L-Alloy 718 Laser welding filler for Alloy 718 and nickel-based alloys, equivalent to Inconel 718 DIM L-Egliloy Co-Superalloy, highest corrosion resistance against chemical attack DIM L-Phyxox Co-Superalloy, highest corrosion resistance against chemical attacks DIM L-Kovar expansion alloy DIM L-Invar 36 expansion alloy More + superalloys on request	different Cr and CrNi-alloys Apparatus construction Medical technology General engineering Marine technology Electro technology Combustion chambers Aviation technology If needed please request the respective data sheet.
DIM L-62 STA Special alloy	Stainless, resistant to corrosion.	STAVAX UNIMAX RAMAX CORRAX 1.2083 M 340 SUS440C S136 (H) / 420SS / 420
DIM L-63 Cr-Ni-Mn-Steel	Stainless, tear strength, high enlongation, could tough (-110°C), scale resistant up to 850°C, post-curing when in use, cold-warm-solidifying, not narb- or etchable, Elongation As: > 40 % Tensile strength Rm N/mm²: > 600	Various types of steels, High-manganese steels Cast steel Stainless steels Mouldings Machine components Armatures S-W-connections Buffer layers, applications Sealing cracks Filling layers at cr-steels (L-35)
DIM L-65 Special alloy (highly alloyed)	Stainless, crack resistant, elastic, high mechanical values, very good seamless weldebility, alloy comprehensive compatible, scale resistant up to 1150°C, cold-warm-solidifying, not narb- or etchable. Elongation > 30% Tensile strength Rm N/mm²: > 750	Cold-warm steels Die castings Steel castings Cr-Ni / Ni-steels Mouldings Machine components Armatures Steels, which are difficult to weld S-W-connections Quick repairs Depositories Multi-layered applications
DIM L-69 Hot Steam	DIM L-69 Hot Steam is suitable for components with higher heat resistance such as heat engines, turbine blades and turbine disks of steam turbines. Applications in aerospace and reactor technology Temperable, highly heat-resistant, increased creep elongation and creep rupture strength, corrosion resistance at temperatures up to approx. 600°C.	1.4913/ 1.4922 / 1.4923, 1.4931 (Turbotherm 20MVNb) / 1.4935 / 1.4937 1.8070 / 1.7335 / 1.7380 Steam valves, pressure and steam boilers Aerospace Reactor technology
DIM L-70 Si 5 3.2245 / AlSi5 Standard alloy	Very well circulating, Elongation15%, Tensile strength Rm N/mm²: 160	Al-Si-alloys Metal sheets different Al-alloys among themselves Alu-moulds Alu-prototype moulds Alu-castings
DIM L-70 Si 12 3.2585 / AlSi12	Very well circulating, elongation 5%, Tensile strength Rm N/mm²: 200	Alu-moulds Alu-prototype moulds Alu-castings - AlSi10Mg Al-Si casting alloy AlSi5Mg / AlSi7Mg AlSi9Cu3 different Al-alloys among themselves
DIM L-70 Mg 3 3.3536 / AlMg3	Well circulating, seawater resistant, Must be applied, if later anodised (here, no silicon alloy application). Elongation 20%, Tensile strength Rm N/mm²: 200	If anodised later: Alu-components Alu-castings Metal sheets Al-Mg-alloys among themselves EN AW-6060 (AlMgSi0,5)
DIM L-70 Mg 5 3.3556 / AlMg5	Well circulating, seawater resistant, Must be applied, if later anodised (here, no silicon alloy application). Elongation 25%, Tensile strength Rm N/mm²: 250	If anodised later: Alu-components Alu-castings Metal sheets Al-Mg-alloys among themselves
DIM L-70 99,5 3.0259 / Al99,5	Hot shortness, Elongation 35%, Tensile strength Rm N/mm²: 80	Pure Al alloys Al 99 – Al 99,8 Al-alloy until 2 Mg, 0,5 Si
DIM L-70 Mg 4,5Mn 3.3548 / AlMg4,5Mn	High-strength, sea water resistant, Elongation 20%, Tensile strength Rm N/mm²: 280	Al-Mg-alloys Al-turbine blases Applications against wear and tear EN 5083
DIM L-70 Mg 4,5MnZr 3.3546 / AlMg4,5MnZr	Unsuscepticle to hot-shortness, seawater resistance, Elongation 20%, Tensile strength Rm N/mm²: 300	Al-Mg Alloys Joint Welding
DIM L-80 Multialloy bronze (yellow coloured)	Very well circulating, wear resistant, sea water resistant, low friction metal-metal, good sliding properties, tough, non-porous, crack resistant, high mechanical values, low melt range, amagnetic, Hardness: > 220 HB, Tensile strength Rm N/mm²: 900	Overall: Ampcoloy, CuBe, Bronze Moldmax, Hovadur Cooling inserts Injection molds Comprehensive for Cu-sorts Comprehensive for steel-sorts Grey spheroidal graphite iron Cu-St-G-sorts among themselves Machine components Gear manufacturing Bearing seats, slipways Chemical apparatus construction Pump components, valves, slider Food industry Shipbuilding industry Applications Connections
DIM L-81 Multi-alloy-bronze	Seawater resistant, Elongation: > 30%	1. layer on tool steel If DIM L-80 used to weld, but in combination with tool steel micro cracks occur. For buffer and pad layers, if welding with DIM L-80 is higher than 5 mm. 2.0920/36/60/70/75 and similar.
DIM L-82 98% copper	High electric conductivity, tough, Colour comparable to dark Cu-sorts.	Copper-Ampcoloy sorts Erosion electrodes Cooling inserts
DIM L-83 2.1461 / CuSi 3	very well circulating, colour comparable to brass. Hardness: 80 HB Elongation: 40%	Brass Diverse application for copper alloys Joint weldings of different Cu-alloys Application weldings on Cu-cooling inserts Everdur
DIM L-84 2.1022 / CuSn 6	wear resistance good sliding properties good resistant to corrosion sea water resistant Insensitive to stress corrosion cracking Insensitive to pitting, even in seawater	CuSn- Alloys with 4-8% tinn CuZn- Alloys (Brass) CusnZnPb- Alloys Weld cladding on cast iron
DIM L-85 2.1056 / CuSn 12	sea water resistant good sliding properties good processability	CuSn - alloy with more than 8% tin CuZn - alloy with more than 8% tin CuSnZnPb -alloy with more than 8% tin Weld cladding on cast iron and steel
DIM L-Ampco-Trode 940 (original)	Beryllium-free alloy, excellent thermal conductivity, excellent corrosion resistance.	Welding filler for reparations on moulds of Ampcoloy 940 Injection moulding tools Blow moulds Partial application for quick heat dissipation
DIM L-BeCu25 CuBe2	srapid heat dissipation good sliding properties very wear-resistant high hardness high electr. conductivity high mech. strength continuous oscillations proof corrosion resistant seawater resistant very good polishability up to 1150 N/mm²	Corresponds MOLDMAX Repairs to cooling inserts made of beryllium copper or Ampcoloy materials Apparatus construction. medical technology
DIM L-Messing Blank Ms-Hard solder CuZn	working temperature 900°C Can be used across all alloys	Gunmetal, bronzen Cu-alloys Cast iron Malleable cast iron Steel
DIM L-Silberlot Blank Ag-Hard solder Ag-CuZn	Cd-free Melting interval 710-740°C Working temperature 740°C	Universal applications for: Jewellery Apparatus and instrument construction Precision engineering
DIM L-Titan 1 Titan Grade 1 3.7024	Very well circulating, ductile and cold formable, Tensile strength and resistant to impacts, (salt) seawater resistant.	Offshore chemistry technology Plate heat exchanger Ti-deep drawing parts Jewelry, watches
DIM L-Titan 2 Titan Grade 2 3.7034	Very well circulating, good mechanical characteristics, high corrosion resistance, (salt) seawater resistance.	Aviation technology Chemical plant engineering Desalination of sea water Medical/dental technology Jewelry, watches
DIM L-Titan 5 Titan Grade 5 3.7164	Very well circulating, high strength and toughness, (salt) seawater resistance.	Marine and aviation technology Gas turbines Ultrasound technology Racing technology Medical and dental technology Measurement electronics Thermo-sensor technology Jewelry, watches.